The cartridge dust collector is an excellent choice to replace the common bag-house or dust bag type collector and can be used to collect almost any dry, fine dust particulate.

Designed with an 8 inch diameter, abrasive resistant, inlet to extend the filter life. The filters are cleaned individually with a  reverse pulse of compressed air. The reverse pulse is automatically actuated using a programmable timer board and solenoid valve system.  It can be used at any time to increase air flow during dust collector operation or after shut down. It is equipped with an acoustical dampening package that will meet or exceed all noise level requirements per OSHA specifications.

The cartridge dust collector is an excellent choice to replace the common bag-house or dust bag type collector and can be used to collect almost any dry, fine dust particulate.

Designed with a 12 inch diameter, abrasive resistant, inlet to extend the filter life. The filters are cleaned with an automatically actuated reverse pulse of compressed air.  This unit is currently equipped with our automated pulsing system. It is effective when used while the dust collector is in operation or shut down and can be used as desired to clean filters from accumulated particulate. The timer board is powered by standard 120v single phase plug-and-go electrical connection.  Factory settings are 3 minute pulse intervals that index to the next sequential valve. These are programmable and easily changed.

The cartridge dust collector is an excellent choice to replace the common bag-house or dust bag type collector and can be used to collect almost any dry, fine dust particulate.

Designed with a 16 inch diameter, abrasive resistant, inlet to extend the filter life. The filters are cleaned with an automatically actuated reverse pulse of compressed air.  This unit is currently equipped with our automated pulsing package. It's effective when used while the dust collector is in operation or shut down and can be used as desired to clean filters from accumulated particulate continuously or as required. The timer board is powered by standard 120v single phase electrical connection. It is factory programmed for 3 minute intervals, completely cycling all filters once every 9 minutes when energized.